http://localhost:8080/xmlui/handle/123456789/2905 Tue, 23 Jun 2026 06:26:47 GMT 2026-06-23T06:26:47Z http://localhost:8080/xmlui/handle/123456789/2913 Title: SD Card Based File System for CNC Machine using TMS320F2837xD Processor Authors: Dhikale, D. D.; Morade, S. S. Abstract: The main objective of this paper is to implement SD card based file handling system for CNC machine.CNC machine uses numerical data to control a machine. The system uses dual core DSP processor with c28xx core. Implementation of file system for CNC machine reduces the file processing and tool processing time to a great extent. The dual core DSP processor is interface with the SD card for large storage of data in CNC machine. The TMS320F2837xD control card has SD card slot so file system can be designed for CNC system. The algorithm for file handling for CNC machine is implemented using Texas instrument Code Composer Studio IDE environment. The another important task of this experiment is to convert the .CNC file into the machine acceptable format for the tool processing and file processing in the CNC machine. Mon, 01 Jul 2019 00:00:00 GMT http://localhost:8080/xmlui/handle/123456789/2913 2019-07-01T00:00:00Z http://localhost:8080/xmlui/handle/123456789/2912 Title: Industrial Parameters Monitoring System based on Embedded Web Server Authors: Chandwadkar, D. M.; Chavan, S. K.; Ugale, S. P. Abstract: The main aim of this paper is to deal with remote monitoring of various physical parameters of an electrical device via web-based application. This system facilitate user to monitor the real-time data from across the globe as the whole data is made available through pre-designed website. Real-time monitoring of electrical parameters is needed beside the high performance and precision of measurements with the development of modern industry towards networking. The main objectives of paper are to access the real-time data on global scale, to reduce the cost of visit & maintenance and finally to improve quality as well as throughput of production. All the physical parameters of an electronic device such as temperature, current, gas flow, viscosity etc. will be monitor independently. Microcontroller is used for the interconnection of all sensors and all collected information will be send to the web page using GSM facility. This real-time monitoring system definitely offers user for hassle free data accession. For high precision, repeatability of real-time data monitoring system has been done. This concept is helpful in industrial sectors for real time monitoring Mon, 01 Jul 2019 00:00:00 GMT http://localhost:8080/xmlui/handle/123456789/2912 2019-07-01T00:00:00Z http://localhost:8080/xmlui/handle/123456789/2911 Title: Heart Rate Monitor using IOT Authors: Jadhav, S. R.; Bhabad, S. S. Abstract: — These days we have increased the percentage of heart diseases including increased risk of heart failures. Our system uses sensors that allows to detect heart rate of patient using heartbeat sensor even if the person is at home. The sensor is then interfaced with our selected microcontroller that checking time to time heart rate readings and transmitting them over internet. The user can set the heart beat limits high and low. After sensing these limits, system will monitoring and if the patients heart beat is goes above the limit, system will send the alert message to the controller which then transmit this data over internet. System always monitors for high as well as low blood pressure. Therefore one who monitor heart rate as well as get an alert message of heart attack to the patients directly from all around the world. Thu, 06 Jun 2019 00:00:00 GMT http://localhost:8080/xmlui/handle/123456789/2911 2019-06-06T00:00:00Z http://localhost:8080/xmlui/handle/123456789/2910 Title: Graphical User Interface for Electric Vehicle Charging Station Authors: Ugale, S. P.; Mandlik, M. T.; Chandwadkar, D. M. Abstract: Electric vehicles are increasing day by day because of its low battery cost and good battery capacity compared to other technology. Increasing automotive growth in electric vehicles also increases the automation to use it.Graphical User Interface for electric vehicles with a full-blown touch screen will become more easy to use with the introduction of fast charging stations. The approach shown to build HMI use Texas Instruments kit and CCS software. The TM4C123GH6PM processors provide scalability it also provides different processing speeds along with the software which is compatible with hardware to build low and high end applications, and provides connectivity with various peripherals required for Electric Vehicle System Equipment HMI e.g. UART and CAN. Along with this processor touch screen display K350QVGA (Texas Instruments) is used to test the output screen Sat, 10 Aug 2019 00:00:00 GMT http://localhost:8080/xmlui/handle/123456789/2910 2019-08-10T00:00:00Z